spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 1 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 3.0x2.5mm surface mount led lamp attention observe precautions for handling electrostatic discharge sensitive devices part number: APB3025CGKQWDF-AMT green white features z high reliability led package. z 3.0mmx2.5mm smd led, 1.1mm thickness. z bi -color,low power consumption. z wide viewing angle. z ideal for backlight and indicator. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. descriptions z the green source color devices are made with algainp on gaas substrate light emitting diode. z the source color devices are made with ingan light emitting diode. z electrostatic discharge and power surge could damage the leds. z it is recommended to use a wrist band or anti- electrostatic gl ove when handling the leds. z all devices, equipments and machineries must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications. applications z traffic signaling. z backlighting (illuminated adver tising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z reading lamps. z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. green white
spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 2 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. 3. luminous intensity value is traceable to the cie127-2007 compliant national standards. part no. emitting color (material) lens type iv (mcd) [2] @ 20ma v iewing angle [1] code. min. max. 2 1/2 APB3025CGKQWDF-AMT green (algainp) yellow fluorescent f 20 40 120 g 40 55 h 55 80 m 80 120 white (ingan) p 200 300 q 300 400 r 400 500 parameter symbol value unit green white power dissipation p d 75 80 mw operating temperature top -40 to+ 100 c storage temperature tstg c junction temperature t j 115 115 c dc forward current (ta=25c) i f 30 20 ma peak forward current [1] (ta=25c) i fm 150 150 ma reverse voltage (ta=25c) v r 5 5 v electrostatic dischar ge threshold (hbm) 3000 250 v -40 to+ 110 thermal resistance 1 chip on (typ.) ( junction/ambient ) 2 chip on (typ.) 720 870 530 670 c/w r th j-a r th j-a absolute maximum ratings at ta=25c note: 1.1/10 duty cycle, 0.1ms pulse width.
spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 3 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 electrical / optical characteristics at ta=25c (green) parameter symbol value unit code. min. typ. max. wavelength at peak emission i f =20ma peak 574 nm dominant wavelength i f =20ma dom [1] nm 4 565 567 5 567 569 6 569 571 spectral bandwidth at 50% rel max i f =20ma ? 20 nm forward voltage i f =20ma v f [2] 2.1 2.5 v reverse current (v r = 5v) i r 10 ua temperature coefficient of peak i f =20ma, -10 c t 100 c tc peak 0.12 nm/ c temperature coefficient of dom i f =20ma, -10 c t 100 c tc dom 0.08 nm/ c temperature coefficient of v f i f =20ma, -10 c t 100 c tc v -1.8 mv/ c 7 571 573 notes: 1.the dominant wavelength ( d) above is the setup value of the sorting machine. ( tolerance d : 1nm. ) 2.forward voltage: +/-0.1v. 3.wavelength value is traceable to the cie127-2007 compliant national standards. 4.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure. electrical / optical characteristics at ta=25c (white) parameter symbol value unit chromaticity coordinate x acc.to cie1931 i f =20ma [typ.] x [1] 0.31 chromaticity coordinate y acc.to cie1931 i f =20ma [typ.] y [1] 0.31 forward voltage i f =20ma [min.] v f [2] - v forward voltage i f =20ma [typ.] 3.3 forward voltage i f =20ma [max.] 4.0 temperature coefficient of v f i f =20ma, -10 c t 100 c [typ.] tc v -2.0 mv/ c temperature coefficient of x i f =20ma, -10 c t 100 c [typ.] tc x -0.18 10 -3 / c temperature coefficient of y i f =20ma, -10 c t 100 c [typ.] tc y -0.20 10 -3 / c reverse current (v r = 5v) [max.] i r 50 ua notes: 1.measurement tolerance of the chro maticity coordinates is 0.01. 2.forward voltage: +/-0.1v. 3.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure.
spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 4 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 APB3025CGKQWDF-AMT green
spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 5 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 white
spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 6 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 APB3025CGKQWDF-AMT white cie 0.20 0.25 0.30 0.35 0.40 0.20 0.25 0.30 0.35 0.40 x y a2 a0 b1 b2 c0 x y x y x y a2 0.263 0.213 a0 0.282 0.245 b2 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 b1 0.313 0.296 c0 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 notes: shipment may contain more than one chromaticity regions. orders for single chromaticity region are generally not accepted. measurement tolerance of the chro maticity coordinates is 0.01.
spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 7 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 APB3025CGKQWDF-AMT reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) tape dimensions (units : mm) reel dimension
spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 8 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 packing & label specifications APB3025CGKQWDF-AMT terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the datas heet. if customer usage exceeds the specified limits, kingbright will not be resp onsible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
spec no: dsal3638 rev no: v.3b date: oct/13/2015 page: 9 of 9 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203012076 reliability test items and conditions the reliability of products shall be sa tisfied with items listed below lot tolerance percent defective (ltpd) : 10% no. test item standards test condition test times / cycles number of damaged 1 continuous operating test - ta =25c ,if = maximum rated current* 1,000 h 0 / 22 2 high temp. operating test eiaj ed- 4701/100(101) ta = 100c if =derated current at 100c 1,000 h 0 / 22 3 low temp. operating test - ta = -40c, if = maximum rated current* 1,000 h 0 / 22 4 high temp. storage test eiaj ed- 4701/100(201) ta = maximum rated storage temperature 1,000 h 0 / 22 5 low temp. storage test eiaj ed- 4701/100(202) ta = -40c 1,000 h 0 / 22 6 high temp. & humidity storage test eiaj ed- 4701/100(103) ta = 60c, rh = 90% 1,000 h 0 / 22 7 high temp. & humidity operating test eiaj ed- 4701/100(102) ta = 60c, rh = 90% if = derated current at 60c 1,000 h 0 / 22 8 resistance to soldering heat eiaj ed- 4701/100(301) tsld=2605c, 10 sec 2 times 0 / 18 9 thermal shock operating test - ta = -40c(15min) ~ 100c(15min) if = derated current at 100c 1,000 cycles 0 / 22 10 thermal shock test - ta = -40c(15min) ~ 100c(15min) 1,000 cycles 0 / 22 11 electric static discharge (esd) eiaj ed- 4701/100(304) c = 100pf , r2 = 1.5k ? v=3000v(green) v = 250v(white) once each polarity 0 / 22 12 vibration test - a = 196m/s2 , f = 100~2khz , t = 48min for all xyz axes 4 times 0 / 22 * : refer to forward current vs. derating curve diagram items symbols conditions failure criteria luminous intensity lv i f = 20ma testing min. value |
